Email:steelspot@yeah.net

Home > astm a325 bolt for steel structure

astm a325 bolt for steel structure

astm a325 bolt for steel structure

Product Introduction:

ASTM A325 - 14 Standard Specification for Structural Bolts ...

ASTM Standards. A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,...

Contact Supplier

A325 Structural Bolts ASTM A325

ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in overall length since they are connecting steel to steel.

Properties · Dimensions · Types · Hardware · Alternatives · Manufacturing

Contact Supplier

ASTM A325 BoltsASTM A325 Structural BoltA325 hex Bolt

ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in overall length since they are connecting steel to steel.

Contact Supplier

Structural Bolts - ASTM A325 & ASTM A490 AALL …

ASTM A325 - Structural Bolts, Steel, Heat Treated, 120/105-ksi Minimum Tensile Strength ASTM A490 - Structrual Bolts, Alloy Steel, Heat Treated, 150-ksi Minimum Tensile Strength Nuts and washers used in a structural joint with heavy hex structural bolts must also meet appropriate standards.

Contact Supplier

Specification for Structural Joints Using ASTM A325 or ...

High-Strength Bolt. An ASTM A325 or A490 bolt, an ASTM F1852 twist-off-type tension-control bolt or an alternative-design fastener that meets the requirements in Section 2.8. Inspector. The party responsible to ensure that the contractor has satisfied the provisions of this Specification in the work. Joint. A bolted assembly with or without collateral materials that is used to join two

Contact Supplier

ASTM A325 - Portland Bolt

Dec 28, 2018 · Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts.

TYPE 1 Medium carbon, carbon boron, or medium carbon alloy steel.

Contact Supplier

ASTM A325 - 10 Standard Specification for Structural Bolts ...

ASTM Standards. A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,...

Contact Supplier

Astm A325 Bolt For Steel Structure, Astm A325 Bolt For ...

offers 778 astm a325 bolt for steel structure products. About 68% of these are bolts, 1% are anchors. A wide variety of astm a325 bolt for steel structure …

Contact Supplier

Buy A325 & A490 Structural Bolts - Heavy Hex Structural ...

The structural bolt is designed with a shorter shank/thread length than the standard hex bolt or hex cap screw since these bolts are used for steel-to-steel connections. ASTM A325 structural bolts are heavy hex bolts made of medium carbon steel with a flat bearing surface, washer faced, and chamfered point.

Contact Supplier

Structural Bolts Fastenal

Specifications

Contact Supplier

ASTM A325 BoltsASTM A325 Structural BoltA325 hex Bolt

Type 1 ASTM A325 heavy hex structural bolts– Medium carbon, carbon boron, or medium carbon alloy steel which undergoes a heat treating operation to achieve the desired mechanical properties. Type 1 is most commonly specified and is likely most readily available in the marketplace.

Contact Supplier

Dimensions ASTM A325

Dimensions. ASTM A325 structural bolts are designed for steel to steel connections. Because they are used in such a specific application, they have dimensional characteristics that are unique and limited compared to most other fastener grades. This includes stock sizes available in the market place, length tolerances, short thread lengths,...

Contact Supplier

ASTM A325 Type 1 Structural Bolts - Grainger Industrial …

ASTM A325 Type 1 Structural Bolts 2 results found that include 477 products Heavy hex head structural bolts from Grainger help you secure steel-to-steel structural connections.

Contact Supplier

ASTM A325 Type 3 Specification - Boltport Fasteners

ASTM A325 Type 3 Specification for heat treated weathering steel materials for bolts, screws, studs, threaded rods and othert externally threaded fasteners, for use in high tensile structural bolting applications. ASTM A325 specification covers requirements for chemical composition, mechanical properties, heat treatment, hardness, recommended nuts-washers, markings, for Type 3 fasteners.

Contact Supplier

HDG or Galvanized Heavy Hex Bolts/Steel Structure Bolts ...

HDG or Galvanized Heavy Hex Bolts/Steel Structure Bolts ASTM A325. Heavy hex bolts have a head that is larger than a standard (finish) hex head. Standard heavy hex bolts are made of low to mid carbon steel. The large head offers a greater bearing surface that distributes the clamping load over a …

Contact Supplier

Structural Bolts - ASTM A325 & ASTM A490 AALL …

ASTM A325 - Structural Bolts, Steel, Heat Treated, 120/105-ksi Minimum Tensile Strength ASTM A490 - Structrual Bolts, Alloy Steel, Heat Treated, 150-ksi Minimum Tensile Strength. Nuts and washers used in a structural joint with heavy hex structural bolts must also meet appropriate standards.

Contact Supplier

Standard Specification for Structural Bolts, Steel, Heat ...

A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

Contact Supplier

ASTM A325 - Wikipedia

ASTM A325. It defines mechanical properties for bolts that range from 1⁄2 to 1 1⁄2 inches (13 to 38 mm) in diameter. The equivalent metric standard is ASTM A325M, which is titled Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength. It defines mechanical properties for sizes M12–36.

Contact Supplier

What is the Difference in Type 1 vs. Type 3 Structural Steel?

According to the RCSC, Type 1 covers medium carbon steel for F3125 Grade A325 bolts and alloy steel for F3125 Grade A490 bolts. They can be mechanically coated or hot-dip galvanized to protect them from corrosion. Unlike Type 3 weathering steel, any rust on Type 1 …

Contact Supplier

Structural Bolts - Portland Bolt

Manufacturing. Portland Bolt manufactures A325 and A490 heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter, typically in lengths longer than those which are …

Contact Supplier

ASTM A325-14 - Standard Specification for Structural Bolts ...

astm a325-14 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength 1.1 This specification 2 covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0 to 1 1 / 2 in., inclusive.

Contact Supplier

ASTM A325 Hex Head Structural Bolts - Galvanized & Plain Steel

FAST FREE SHIPPING on Wholesale Bulk ASTM A-325 Hex Head Structural Bolts - Hot Dipped Galvanized & Plain Steel - Aspen Fasteners - Inventory from stock or manufacturing to print, we are your supply source for fasteners. Buy online or call us at 1-800-479-0056.

Contact Supplier

Structural Bolts - Bolts - Grainger Industrial Supply

Structural Bolts 5 results found that include 1,857 products Heavy hex head structural bolts from Grainger help you secure steel-to-steel structural connections.

Contact Supplier

Properties ASTM A325

Below are the chemical and mechanical requirements per the ASTM A325 specification. In addition, you will find the estimated mechanical property requirements for each diameter of bolt required. One thing to note is that with the implementation of ASTM F3125 Grade A325, the mechanical properties differ slightly as indicated below.

Contact Supplier

ASTM A325 - 14 Standard Specification for Structural Bolts ...

ASTM Standards. A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,...

Contact Supplier

A325 Structural Bolts ASTM A325

ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in overall length since they are connecting steel to steel.

Properties · Dimensions · Types · Hardware · Alternatives · Manufacturing

Contact Supplier

ASTM A325 BoltsASTM A325 Structural BoltA325 hex Bolt

ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in overall length since they are connecting steel to steel.

Contact Supplier

Structural Bolts - ASTM A325 & ASTM A490 AALL …

ASTM A325 - Structural Bolts, Steel, Heat Treated, 120/105-ksi Minimum Tensile Strength ASTM A490 - Structrual Bolts, Alloy Steel, Heat Treated, 150-ksi Minimum Tensile Strength Nuts and washers used in a structural joint with heavy hex structural bolts must also meet appropriate standards.

Contact Supplier

Specification for Structural Joints Using ASTM A325 or ...

High-Strength Bolt. An ASTM A325 or A490 bolt, an ASTM F1852 twist-off-type tension-control bolt or an alternative-design fastener that meets the requirements in Section 2.8. Inspector. The party responsible to ensure that the contractor has satisfied the provisions of this Specification in the work. Joint. A bolted assembly with or without collateral materials that is used to join two

Contact Supplier

ASTM A325 - Portland Bolt

Dec 28, 2018 · Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts.

TYPE 1 Medium carbon, carbon boron, or medium carbon alloy steel.

Contact Supplier

ASTM A325 - 10 Standard Specification for Structural Bolts ...

ASTM Standards. A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,...

Contact Supplier

Astm A325 Bolt For Steel Structure, Astm A325 Bolt For ...

offers 778 astm a325 bolt for steel structure products. About 68% of these are bolts, 1% are anchors. A wide variety of astm a325 bolt for steel structure …

Contact Supplier

Buy A325 & A490 Structural Bolts - Heavy Hex Structural ...

The structural bolt is designed with a shorter shank/thread length than the standard hex bolt or hex cap screw since these bolts are used for steel-to-steel connections. ASTM A325 structural bolts are heavy hex bolts made of medium carbon steel with a flat bearing surface, washer faced, and chamfered point.

Contact Supplier

Structural Bolts Fastenal

Specifications

Contact Supplier

ASTM A325 BoltsASTM A325 Structural BoltA325 hex Bolt

Type 1 ASTM A325 heavy hex structural bolts– Medium carbon, carbon boron, or medium carbon alloy steel which undergoes a heat treating operation to achieve the desired mechanical properties. Type 1 is most commonly specified and is likely most readily available in the marketplace.

Contact Supplier

Dimensions ASTM A325

Dimensions. ASTM A325 structural bolts are designed for steel to steel connections. Because they are used in such a specific application, they have dimensional characteristics that are unique and limited compared to most other fastener grades. This includes stock sizes available in the market place, length tolerances, short thread lengths,...

Contact Supplier

ASTM A325 Type 1 Structural Bolts - Grainger Industrial …

ASTM A325 Type 1 Structural Bolts 2 results found that include 477 products Heavy hex head structural bolts from Grainger help you secure steel-to-steel structural connections.

Contact Supplier

ASTM A325 Type 3 Specification - Boltport Fasteners

ASTM A325 Type 3 Specification for heat treated weathering steel materials for bolts, screws, studs, threaded rods and othert externally threaded fasteners, for use in high tensile structural bolting applications. ASTM A325 specification covers requirements for chemical composition, mechanical properties, heat treatment, hardness, recommended nuts-washers, markings, for Type 3 fasteners.

Contact Supplier

HDG or Galvanized Heavy Hex Bolts/Steel Structure Bolts ...

HDG or Galvanized Heavy Hex Bolts/Steel Structure Bolts ASTM A325. Heavy hex bolts have a head that is larger than a standard (finish) hex head. Standard heavy hex bolts are made of low to mid carbon steel. The large head offers a greater bearing surface that distributes the clamping load over a …

Contact Supplier

Structural Bolts - ASTM A325 & ASTM A490 AALL …

ASTM A325 - Structural Bolts, Steel, Heat Treated, 120/105-ksi Minimum Tensile Strength ASTM A490 - Structrual Bolts, Alloy Steel, Heat Treated, 150-ksi Minimum Tensile Strength. Nuts and washers used in a structural joint with heavy hex structural bolts must also meet appropriate standards.

Contact Supplier

Standard Specification for Structural Bolts, Steel, Heat ...

A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

Contact Supplier

ASTM A325 - Wikipedia

ASTM A325. It defines mechanical properties for bolts that range from 1⁄2 to 1 1⁄2 inches (13 to 38 mm) in diameter. The equivalent metric standard is ASTM A325M, which is titled Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength. It defines mechanical properties for sizes M12–36.

Contact Supplier

What is the Difference in Type 1 vs. Type 3 Structural Steel?

According to the RCSC, Type 1 covers medium carbon steel for F3125 Grade A325 bolts and alloy steel for F3125 Grade A490 bolts. They can be mechanically coated or hot-dip galvanized to protect them from corrosion. Unlike Type 3 weathering steel, any rust on Type 1 …

Contact Supplier

Structural Bolts - Portland Bolt

Manufacturing. Portland Bolt manufactures A325 and A490 heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter, typically in lengths longer than those which are …

Contact Supplier

ASTM A325-14 - Standard Specification for Structural Bolts ...

astm a325-14 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength 1.1 This specification 2 covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0 to 1 1 / 2 in., inclusive.

Contact Supplier

ASTM A325 Hex Head Structural Bolts - Galvanized & Plain Steel

FAST FREE SHIPPING on Wholesale Bulk ASTM A-325 Hex Head Structural Bolts - Hot Dipped Galvanized & Plain Steel - Aspen Fasteners - Inventory from stock or manufacturing to print, we are your supply source for fasteners. Buy online or call us at 1-800-479-0056.

Contact Supplier

Structural Bolts - Bolts - Grainger Industrial Supply

Structural Bolts 5 results found that include 1,857 products Heavy hex head structural bolts from Grainger help you secure steel-to-steel structural connections.

Contact Supplier

Properties ASTM A325

Below are the chemical and mechanical requirements per the ASTM A325 specification. In addition, you will find the estimated mechanical property requirements for each diameter of bolt required. One thing to note is that with the implementation of ASTM F3125 Grade A325, the mechanical properties differ slightly as indicated below.

Contact Supplier


astm a325 bolt for steel structureProduct Details:

ASTM A325 - 14 Standard Specification for Structural Bolts ...

ASTM Standards. A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,...

Contact Supplier

A325 Structural Bolts ASTM A325

ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in overall length since they are connecting steel to steel.

Properties · Dimensions · Types · Hardware · Alternatives · Manufacturing

Contact Supplier

ASTM A325 BoltsASTM A325 Structural BoltA325 hex Bolt

ASTM A325 covers high strength structural bolts used in structural steel connections. A325s have a heavy hex head, a full body diameter, and are normally short in overall length since they are connecting steel to steel.

Contact Supplier

Structural Bolts - ASTM A325 & ASTM A490 AALL …

ASTM A325 - Structural Bolts, Steel, Heat Treated, 120/105-ksi Minimum Tensile Strength ASTM A490 - Structrual Bolts, Alloy Steel, Heat Treated, 150-ksi Minimum Tensile Strength Nuts and washers used in a structural joint with heavy hex structural bolts must also meet appropriate standards.

Contact Supplier

Specification for Structural Joints Using ASTM A325 or ...

High-Strength Bolt. An ASTM A325 or A490 bolt, an ASTM F1852 twist-off-type tension-control bolt or an alternative-design fastener that meets the requirements in Section 2.8. Inspector. The party responsible to ensure that the contractor has satisfied the provisions of this Specification in the work. Joint. A bolted assembly with or without collateral materials that is used to join two

Contact Supplier

ASTM A325 - Portland Bolt

Dec 28, 2018 · Prior to its withdrawl in 2016, the ASTM A325 specification covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts.

TYPE 1 Medium carbon, carbon boron, or medium carbon alloy steel.

Contact Supplier

ASTM A325 - 10 Standard Specification for Structural Bolts ...

ASTM Standards. A194/A194M Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,...

Contact Supplier

Astm A325 Bolt For Steel Structure, Astm A325 Bolt For ...

offers 778 astm a325 bolt for steel structure products. About 68% of these are bolts, 1% are anchors. A wide variety of astm a325 bolt for steel structure …

Contact Supplier

Buy A325 & A490 Structural Bolts - Heavy Hex Structural ...

The structural bolt is designed with a shorter shank/thread length than the standard hex bolt or hex cap screw since these bolts are used for steel-to-steel connections. ASTM A325 structural bolts are heavy hex bolts made of medium carbon steel with a flat bearing surface, washer faced, and chamfered point.

Contact Supplier

Structural Bolts Fastenal

Specifications

Contact Supplier

ASTM A325 BoltsASTM A325 Structural BoltA325 hex Bolt

Type 1 ASTM A325 heavy hex structural bolts– Medium carbon, carbon boron, or medium carbon alloy steel which undergoes a heat treating operation to achieve the desired mechanical properties. Type 1 is most commonly specified and is likely most readily available in the marketplace.

Contact Supplier

Dimensions ASTM A325

Dimensions. ASTM A325 structural bolts are designed for steel to steel connections. Because they are used in such a specific application, they have dimensional characteristics that are unique and limited compared to most other fastener grades. This includes stock sizes available in the market place, length tolerances, short thread lengths,...

Contact Supplier

ASTM A325 Type 1 Structural Bolts - Grainger Industrial …

ASTM A325 Type 1 Structural Bolts 2 results found that include 477 products Heavy hex head structural bolts from Grainger help you secure steel-to-steel structural connections.

Contact Supplier

ASTM A325 Type 3 Specification - Boltport Fasteners

ASTM A325 Type 3 Specification for heat treated weathering steel materials for bolts, screws, studs, threaded rods and othert externally threaded fasteners, for use in high tensile structural bolting applications. ASTM A325 specification covers requirements for chemical composition, mechanical properties, heat treatment, hardness, recommended nuts-washers, markings, for Type 3 fasteners.

Contact Supplier

HDG or Galvanized Heavy Hex Bolts/Steel Structure Bolts ...

HDG or Galvanized Heavy Hex Bolts/Steel Structure Bolts ASTM A325. Heavy hex bolts have a head that is larger than a standard (finish) hex head. Standard heavy hex bolts are made of low to mid carbon steel. The large head offers a greater bearing surface that distributes the clamping load over a …

Contact Supplier

Structural Bolts - ASTM A325 & ASTM A490 AALL …

ASTM A325 - Structural Bolts, Steel, Heat Treated, 120/105-ksi Minimum Tensile Strength ASTM A490 - Structrual Bolts, Alloy Steel, Heat Treated, 150-ksi Minimum Tensile Strength. Nuts and washers used in a structural joint with heavy hex structural bolts must also meet appropriate standards.

Contact Supplier

Standard Specification for Structural Bolts, Steel, Heat ...

A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) A449 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

Contact Supplier

ASTM A325 - Wikipedia

ASTM A325. It defines mechanical properties for bolts that range from 1⁄2 to 1 1⁄2 inches (13 to 38 mm) in diameter. The equivalent metric standard is ASTM A325M, which is titled Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength. It defines mechanical properties for sizes M12–36.

Contact Supplier

What is the Difference in Type 1 vs. Type 3 Structural Steel?

According to the RCSC, Type 1 covers medium carbon steel for F3125 Grade A325 bolts and alloy steel for F3125 Grade A490 bolts. They can be mechanically coated or hot-dip galvanized to protect them from corrosion. Unlike Type 3 weathering steel, any rust on Type 1 …

Contact Supplier

Structural Bolts - Portland Bolt

Manufacturing. Portland Bolt manufactures A325 and A490 heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter, typically in lengths longer than those which are …

Contact Supplier

ASTM A325-14 - Standard Specification for Structural Bolts ...

astm a325-14 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength 1.1 This specification 2 covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0 to 1 1 / 2 in., inclusive.

Contact Supplier

ASTM A325 Hex Head Structural Bolts - Galvanized & Plain Steel

FAST FREE SHIPPING on Wholesale Bulk ASTM A-325 Hex Head Structural Bolts - Hot Dipped Galvanized & Plain Steel - Aspen Fasteners - Inventory from stock or manufacturing to print, we are your supply source for fasteners. Buy online or call us at 1-800-479-0056.

Contact Supplier

Structural Bolts - Bolts - Grainger Industrial Supply

Structural Bolts 5 results found that include 1,857 products Heavy hex head structural bolts from Grainger help you secure steel-to-steel structural connections.

Contact Supplier

Properties ASTM A325

Below are the chemical and mechanical requirements per the ASTM A325 specification. In addition, you will find the estimated mechanical property requirements for each diameter of bolt required. One thing to note is that with the implementation of ASTM F3125 Grade A325, the mechanical properties differ slightly as indicated below.

Contact Supplier

Back

Related Products:

product| About Us

Copyright © 2019 by BEST Steel Structure Co., Ltd All rights reserved.